Note: 2-3 Week lead time

We have assembled what we believe to be the best fuel system option available at a reasonable price. We have streamlined our listing to cover basically any Mustang and any power adder setup.

Rails:

The existing rail options for -6AN and -8AN will come with the fittings needed to plumb your setup in parralel using your billet rails. The billet add on rails will include our rails for 11+ Coyote using stock style rail mounting. The new -8AN Whipple rail upgrade will include Whipple -8AN rails for Gen 5 blowers.

Please note: Stock 18+ Mustang rails will be restricted around 850 whp. The crossover is small. It will show pressure drop on the sensor, but the mechanical gauge will show it holds pressure. If running an 18+ Mustang with a turbo or centri setup, consider a rail upgrade.

-We use custom made micro relay modules which are much nicer than the generic big module setups.

-Standard hose is braided CPE (PTFE available and suggested for long life on E85)

-Stage 1 includes what is to run the stock feed line

-Stage 2 includes a -8AN feed and massive stainless steel filter

-Stage 3 includes an external regulator and full return line

-Stage 4 - Triple Pump with included -10an Feed and -8an Return

-TI274 Pumps are standard, TI285 and TI295 are available

-Liquid Filled Gauge (regulator or feed line mounted depending on config)

-Optional Billet Check Valve for easier startups on Stage 2 and up

-Triples include a connector style hobbs for pump 2 and 3

-As with all other brands, you must supply vacuum hose to meet your system spec or add it on in a 25 ft pack.

-We offer the option to assemble the Radium hat in advance. Please note professional installation is recommended, with someone familiar with wiring and fuel systems.

-Full install support at www.arcanep2.com/support

-6 Month Warranty on our wiring. Applicable manufacturer warranty on the Radium hat and DW regulator. Walbro does not warranty fuel pumps when used in race applications.

Please note that while we do attempt to keep all components on hand and ready to go, occasionally there will be a lead time. If you order PTFE, those are put together and assembled to order. If you have concerns about lead time please reach out in advance.