Mustang GT Intake

The Mustang GT is a well-rounded car in just about every aspect, and the intake system is too. The stock Mustang GT Intake is designed well, and the community sees that. Still cp-e™ felt that they could take the good & the bad from the stock system, and make it even better. After a long engineering process, cp-e™ is proud to release the IceBox™ for the Mustang GT.

Due to the factory mass air flow system, this intake will cause a check engine light unless the vehicle is tuned. We have come up with suggested parameters to give to your tuner, which can be downloaded here.

Mustang GT Intake Features

  • Fully sealed custom designed airbox using factory ram air
  • CNC MAF Housing
  • Perfect OEM fitment with no CEL
  • More than 5% gains in upper RPMs
  • No power loss in lower RPMs
  • Made in the U.S.A.
  • LIFETIME Warranty

Available powder coated in Satin Black the IceBox™ offers the most well thought out solution to getting air to your engine yet. The IceBox™ comes with a full 4.00” mandrel bent tube. Welded onto the tube are a CNC-lathed port for the PCV system, a CNC-milled MAF bung, and a laser cut support bracket. Includes clear plexi-glass window (ships with orange peel-off protective coating).


The intake tube then attaches to the air box through a 5-ply silicone elbow and a CNC-lathed aluminum bellmouth. This velocity stack bellmouth smoothly compresses the air providing a minimal amount of energy loss which translates to a higher air speed through the tube. The included 4.00” air filter is specially designed by cp-e™ to give the most free flowing air flow possible, with your choice between Dflow™ or SynOil™.

Part of what makes the the stock intake system well-rounded is the great design of the stock box. It brings in cool air efficiently, and isolates the filter from the hot air in the engine bay. Where the stock box lacks is where the cp-e™ IceBox™ shines above all. The IceBox™ box is laser cut and CNC-bent 18 gauge stainless steel. Stainless steel is great for this application for not only its resistance to corrosion, but also its thermal properties allow the interior of the box to stay cool, even when the box itself heats up. The box utilizes both stock fresh air ducts, and also sucks up cool fresh air from the wheel well. The box is topped off by clear plexi glass to seal the filter from the heat, providing a sweet view and easy access to the filter. Lastly, the box easily mounts in the stock location with the laser cut brackets and CNC-lathed mounting feet.

For a filter replacement, please use our Replacement 4″ Air Filter.

cp-e™ IceBox™ 5.0L V8 Ford Mustang GT Intake System 15-20

You may also like