56000

Complete half moon shaped ice tanks that sit in spare tire well. These are complete kits that are listed in stages.

All these half moon tanks here will come standard with extra large black cap, with the option to put a black/clear cap. Note the black and clear caps have been known to crack at the clear center due to excess heat in trunk. I recommend the full black cap or the black and red ring cap. The black/red ring cap is the best out there for sealing. It has ten mounting bolts instead of 6 like the standard one, and has outside threads. The black and red cap will not fit flush under carpet.

Stage one, 5 gallon half moon tank with 1100 gph pump. 3/4” hose and install kit. Pretty much complete ready for install, minus wiring. This is budget friendly kit that allows you to pump ice water up front. This fits flush in all Mustang trunks under carpet. Comes with pump, 50' heat insulate hose, insulated clamps, snap clamps for fittings, brass drain, fused relay, all hardware.

Stage two (Most Popular), 7 gallon with 2000 gph rule pump. This comes complete with hose and installation kit. Comes with pump, 50' heat insulate hose, insulated clamps, snap clamps for fittings, brass drain, fused relay, all hardware.

Stage three, 7 gallon with Davies Craig 150 pump, hose and install kit. Pump is external pump and flows very good. This kit is still budget friendly but works really well and flows great. Comes with pump, 50' heat insulate hose, insulated clamps, snap clamps for fittings, brass drain, fused relay, all hardware.

Stage four, 7 gallon half moon tank with Stewart EMP 4600rpm pump. This is the top flowing pump for the intercooler system. Comes with correct fitting size to feed the pump and still use your factory intercooler and heat exchanger. Comes with pump, 50' heat insulate hose, insulated clamps, snap clamps for fittings, brass drain, fused relay, all hardware.

PNRWelding Complete Trunk Mount Intercooler Tank Kits
56000

You may also like